Impulse 463N - Manual (Page 39)

©Sealevel Systems, Inc.
SL9049 - 11/2010
SeaI/O Manual 39
1. To install the driver executable from the Sealevel disk, browse the Sealevel Systems
disk for: Software\SeaIO\Windows\SeaIO Installer.exe
2. If you are using Windows Vista or newer operating systems, right click on the
installer executable and choose ‟Run as Administrator‟. If you are using an operating
system prior to Windows Vista, double click on the executable to launch the
Installshield and initiate the driver installation.
3. Please refer to step six above in the Disk Installation section and follow the
remaining installation steps.
1. To obtain the most current software driver package from Sealevel‟s website,
download from here:
 SeaIO for Windows
 SeaIO for Linux
2. Choose the link for the target operating system and click on the „Download File‟ link
to download the current driver.
3. Once downloaded, if you are using Windows Vista or newer operating systems, right
click on the installer executable and choose ‟Run as Administrator‟. If you are using
an operating system prior to Windows Vista, double click on the executable to
launch the Installshield and initiate the driver installation.
4. Please refer to step six above in the Disk Installation section and follow the
remaining installation steps.
1. Download the current SeaIO driver using the instructions from the Downloaded
Software Installation section above. Please take note of the destination directory it
will save to.
2. Uninstall the currently loaded driver SeaIO driver found in the Control Panel. Prior to
Windows Vista, SeaIO will be populated in the „Add/Remove Programs‟ list. In
Windows Vista and newer operating systems it will be found in the „Programs and
Features‟ list.
3. Navigate to the Device Manager and remove the Sealevel digital I/O adapter by right
clicking on the line item under „SeaI/O Device‟ and choosing „Uninstall’.