Impulse 463N User Manual
Page 60
©Sealevel Systems, Inc.
SL9049 - 11/2010
SeaI/O Manual
60
You must now change the IP Address of your wireless adapter to match the subnet (first 3
octets) of the wireless SeaI/O module listed in Ethernet Config.
You can change your wireless adapter's IP Address by going to the Properties dialog for your
wireless adapter (Start Settings Network Connections). Right-click on your network adapter
and then select Properties from the menu. This opens the Wireless Network Connection
Properties window.
On the General tab, select „Internet Protocol (TCP/IP)‟, leave the box checked, and then click the
Properties button.
Before you change any settings in the following window, make a note of your original
settings. You will need to revert back to your original wireless adapter settings once you
have successfully configured the wireless SeaI/O module to work with your network.