Impulse 463N - Manual (Page 40)

©Sealevel Systems, Inc.
SL9049 - 11/2010
SeaI/O Manual 40
4. In the Device Manager under „Action‟, choose „Scan for hardware changes‟. This will
prompt the installation of the adapter and associate it with the newly installed SeaIO
driver.
If you are using a Wireless (W-series) or Ethernet (E-series) SeaI/O module, skip ahead to
either the Configuring a Wireless Module or Configuring an Ethernet Module sections of this
manual, before using MaxSSD.