Impulse 463N User Manual
Page 69
Advertising
©Sealevel Systems, Inc.
SL9049 - 11/2010
SeaI/O Manual
69
Start MaxSSD (Start All Programs Sealevel SeaMAX MaxSSD) and select Ethernet in the
drop down box. Verify that the IP Address for the wireless SeaI/O module appears in the right
hand pane.
Choose the correct IP Address (if more than one is listed) and click the “SeaI/O Configuration”
tab. Use the drop down box to select the appropriate Slave ID (default is 247) and the click the
“Get SeaI/O Module Settings” button. You will see the description for the wireless SeaI/O
module appear in the right hand frame.
Advertising