Impulse 463N User Manual
Page 57
©Sealevel Systems, Inc.
SL9049 - 11/2010
SeaI/O Manual
57
Start by opening the Windows Wireless Network Connection utility, which can be found by
clicking the Start button and hovering over My Network Places. Right-click on My Network
Places and then select Properties from the menu. You should see a Wireless Network
Connection listed in the new window that opens up.
Right-click on your wireless network connection and select „View Available Wireless Networks‟
from the menu.
The Wireless Network Connection window opens, as shown below, and you should see the
SeaI/O module listed with the SSID “SL_Recovery.” If not, reset the module using the
instructions on the previous page. Other nearby wireless networks will also be listed here.
Select the SSID “SL_Recovery” and click the Connect button.