Impulse 463N - Manual (Page 45)

©Sealevel Systems, Inc.
SL9049 - 11/2010
SeaI/O Manual 45
The “Digital IO” tab of MaxSSD is displayed when using Sealevel I/O devices featuring discrete
inputs and outputs. It displays the device‟s current input and/or output status in an intuitive
and usable manner.
When displaying SeaI/O, the “Digital IO” tab displays inputs and outputs in groupings (or banks)
of eight. Therefore, a Sealevel I/O device with 16 inputs and 8 outputs would show two banks
of inputs and one bank of outputs.
When banks of inputs are displayed, the status LEDs update on each of the banks automatically.
This allows you to actively monitor external signals.
With a bank of outputs, the output coils can be set using the buttons below each output LED. As
each coil is set, the I/O module is read. The corresponding status LED in the “Digital IO” tab
indicates the state of the coil. In the example below, a SeaI/O module with 16 Reed relays is
shown.