MaxPower Corp Gamatronic Power+ SA - Manual (Page 42)

User Guide Gamatronic Electronic Industries Ltd.
6. THE EVENT LOG
The event log is really a combination of two functions:
• A display of active alarms
• A history of important events that occurred to the UPS.
Alarms
In the event of an alarm (the audible alarm sounds or the red alarm light on the
P
OWER + SA console lights up), go to the event log to determine the nature of the
problem. (Pressing the Esc key from the Main Screen silences the audible alarm.)
Navigating to the event log
To see the event log:
From the Main Screen, press the Ent button to display the Main Menu.
On the Main Menu, press Ent again.
Active alarm display
The first thing you see upon entering the event log is the active alarm display. If there
are any active alarms, a 1-line message is displayed for each alarm to indicate the
nature of the alarm. For example, in the following illustration there are three active
alarms: END OF BACKUP (i.e., the battery has been exhausted), AC INPUT FAIL,
and BYPASS NOT READY.
A list of all possible alarms can be seen on page 39.
If there are no active alarms, the display indicates this.
36 +
POWER SA User Guide (UL), Release 1.7