MaxPower Corp Gamatronic Power+ SA - Manual (Page 57)

Gamatronic Electronic Industries Ltd.
After pressing Ent the screen looks like this:
9. The UPS fans may stop working for a moment. They will start up again by
themselves after the voltage adjustment is complete.
10. Press Esc to return to the Main screen.
9.3.2 To adjust (fine tune) the AC output voltage
1. From the Main Screen, press the Ent button to display the Main Menu.
2. On the Main Menu, choose ADVANCED OPTIONS and press Ent.
3. In the ADVANCED MENU, select TECHNICIAN MENU.
4. In the TECHNICIAN MENU select CHANGE VOLTAGE.
5. You are prompted to choose the type of voltage to change.
Select OUTPUT VOLTAGE.
6. You are prompted to choose a change to the nominal value or an adjustment
(fine-tuning). Choose DO ADJUSTMENT
7. You are prompted to choose the phase to be adjusted. Choose a phase.
8. Use the UP and DOWN buttons to specify the voltage adjustment value. The
voltage can be adjusted up or down by up to 7 volts.
POWER+ SA User Guide (UL), Release 1.0 51