MaxPower Corp Gamatronic Power+ SA User Manual
Page 76
Gamatronic Electronic Industries Ltd.
6.
Run the two AC input cables through the cable holders labeled “AC input” and
“Bypass AC input” in Figure 15-3 on page 69. Connect the cables to their
respective input terminals (“Rectifier AC input” and “Bypass AC input”), also
shown in Figure 15-3. Use the appropriate grade of wire as specified in Table
15-1 on page 66, or according to local electrical codes.
7.
Run the batteries cable through the cable holder labeled “Batteries” in Figure
15-3. Use the appropriate grade of wire as specified in Table 15-1 on page 66,
or according to local electrical codes.
8.
Tighten all cable holders so that the cables are fastened securely.
Continue to section 15.3.3, “Battery installation”.
POWER+ SA User Guide (UL), Release 1.0
70