MaxPower Corp Gamatronic Power+ SA - Manual (Page 92)

Gamatronic Electronic Industries Ltd.
POWER+ SA User Guide (UL), Release 1.0 86
Figure 20-4: UPS rear panel view, with protective cover removed
5. Run the AC output cable through the cable holder labeled “AC output” in
Figure 20-4 on page 86. Connect the cable to the AC output terminals, also
detailed in Figure 20-4. Use the appropriate grade of wire as specified in Table
15-1 on page 66, or according to local electrical codes.
6. Run the two AC input cables through the cable holders labeled “AC input” and
“Bypass AC input” in Figure 20-4 on page 69. Connect the cables to their