Meriam MFT 4010 Modular Calibrator_HART Communicator - Manual (Page 80)

75
RETURNING THE MFT FOR REPAIR
In the event that a MFT requires service and must be returned to the factory for repair, please contact your local
Meriam Representative (see list and contact information at
www.meriam.com or the factory direct at the numbers
listed below.
DO NOT send any unit in for repair without first contacting Meriam for a Return Material Authorization
(RMA) number. If this number has not been obtained and clearly marked on the package being shipped
back, the unit will be returned at the shipper’s expense. This number will be provided by the
Meriam Repair
Department when you call, fax or e-mail your information. An RMA number must accompany all incoming
packages to insure proper tracking, processing and repair work.
To assist us with processing your repair request, please have the Model & Serial Number of the unit available
when you call. This information is located on the MFT label and on all sensor module labels. This information
can also be obtained directly from the MFT display by pressing the Sensr soft key while in Measure Mode. See
the Measure Mode section in this manual for more details.
Meriam Process Technologies
10920 Madison Avenue
Cleveland,OH 44102
TELEPHONE: (216) 281-1100
E-mail: [email protected]
Web Site: www.meriam.com