Alcatel-Lucent Omni 6600 - Manual (Page 26)

OmniSwitch 6600 Family Chassis and Hardware Components OmniSwitch 6624
OmniSwitch 6600 Family Hardware Users Guide September 2006 page 2-2
OmniSwitch 6624
The OS6624 is a stackable edge/workgroup switch offering 24 10/100 Ethernet ports. The OS6624 can
also be equipped with upto four Gigabit Ethernet ports for connections to a high speed backbone or server.
The front panel of the OS6624 chassis contains the following major components:
• Console (DB-9) port
• Stack indicator LED
• 24 10/100 Ethernet ports
• One slot for OS6600-GNI-U2 (fiber) or OS6600-GNI-C2 (copper) Gigabit Ethernet uplink module
• One slot for Gigabit Ethernet uplink module as described above or stacking module
Note. The OmniSwitch 6624 is also known as the OmniSwitch 6602-24.
Refer to the illustration below for more front panel information. For detailed LED descriptions, refer to
page 2-18 . For information on the chassis rear panel, refer to page 2-20 .
OmniSwitch 6624 Front Panel
CONSOLE
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
1
2
EXPANSION/STACKING EXPANSION
25 26 2 7 2 8
TM
OmniSwitch 6624
OK1
OK2
PS1
PS2
PRI
SEC
TEMP
FAN SEL
LINK/ACT LINK/ACT LINK/ACT LINK/ACT
10/100 Ethernet Ports
The OS6624 provides 24 10/100
Ethernet ports. These ports are
twisted-pair and are individually
configurable as 10BaseT or
100BaseTX. The ports use RJ-45
connectors.
Console Port
The OS6624 front panel provides one RS232
port for console connections. Serial console
connections are used by network administrators
for switch management. This female DB-9 con-
nector provides a DCE console connection.
Stacking or Uplink Module Slot
The OS6624 provides an additional slot that
can accommodate either a stacking module or
a Gigabit Ethernet uplink module.
If you use a Gigabit Ethernet uplink module
in this slot, the OS6624 must be used as a
stand-alone switch.
A stacking module must be installed in this
slot if the switch is to be used in a stack. For
detailed information on stacking switches,
refer to
Chapter 4, “Managing OmniSwitch
6600 Family Stacks.”
Gigabit Ethernet Uplink Module Slot
The OS6624 provides a dedicated slot for Gigabit Ethernet uplink
modules. This slot supports the following module types:
• OS6600-GNI-C2—Provides two fixed 1000BaseT copper
connections (uses two RJ-45 connectors). Supports distances
up to 100 meters.
• OS6600-GNI-U2—Provides two MiniGBIC bays that
support hot-swappable 1000BASE-X MiniGBIC transceivers.
Status and Slot Indicator LEDs
For information on the OS6624’s
status and slot indicator LEDs,
refer to
page 2-18 .
Slot Selector Button
The slot selector button, located
directly beneath the slot indicator
LED, is used to manually assign
slot numbers to switches in stacked
configurations. Refer to
Chapter 4,
“Managing OmniSwitch 6600
Family Stacks,”
for detailed infor-
mation.