Alcatel-Lucent Omni 6600 - Manual (Page 50)

OmniSwitch 6600 Family Chassis and Hardware Components Backup Power Supply
OmniSwitch 6600 Family Hardware Users Guide September 2006 page 2-26
Backup Power Supply
OmniSwitch 6600 Family switches provide one factory-installed power supply per chassis. OmniSwitch
6624, 6600-U24, and 6648 switches provide one bay for the optional OS6600-BPS backup power supply
while OmniSwitch 6602-24 and 6602-48 switches provide one bay for the optional OS6602-BPS or
OS6602-BPS-DC backup power supplies. This backup power supply bay is located on the chassis rear
panel (see
page 2-20 for details).
Backup Power Supply Front Panel (OS6600-BPS Shown)
OmniSwitch 6600-P24 switches use the external OS6600-BPS-P backup power supply, which provides
backup electrical current used for switch functions and PoE ports. The OS6600-BPS-P contains two built-
in power supplies—one supplying 55 Watts (100 Watts maximum) for switch functions and the other
supplying 210 watts for PoE functions. For information on setting up the OS6600-BPS-P, refer to
Chapter 3, “Installing and Managing Power over Ethernet (PoE).”
!
CAUTION: THIS UNIT MAY BE EQUIPPED
WITH TWO POWER CONNECTIONS. TO REDUCE
THE RISK OF ELECTRICAL SHOCK, DISCONNECT
BOTH POWER CONNECTIONS BEFORE
SERVICING UNIT.
ATTENTION: CET APPAREIL COMPORTE
PLUS D'UN CORDON D'ALIMENTATION. AFIN DE
PREVENIR LES CHOCS ELECTRIQUES, DEBRANCHE
LES DEUX CORDONS D'ALIMENTATION AVANTE DE
FAIRE LA REPARATION.
50/60 Hz, 2/2/1 A
100/115/230 V
Power Switch.
indicates on position;
indicates off position.
Power Connector Socket. Type IEC-320-C13
(OS6600-BPS and OS6602-BPS). Supports one
10 amp power cord.
It is recommended that you use Alcatel-
provided power cords.
Product, Safety, and Compliance Information.
Refer to the “Regulatory Compliance and Safety
Information” chapter for detailed information.