Alcatel-Lucent Omni 6600 - Manual (Page 44)

OmniSwitch 6600 Family Chassis and Hardware Components Rear Panel
OmniSwitch 6600 Family Hardware Users Guide September 2006 page 2-20
Rear Panel
The rear panel of OmniSwitch 6600 Family switches contains the following major components:
Note. Arrangement and location of components vary depending on chassis type.
• Factory-installed power supply (all OmniSwitch 6600 Family switches)
• Backup power supply bay for optional OS6600-BPS (OS6624, OS6648, OS6600-U24), OS6602-BPS
(OS6602-24 and OS6602-48), or OS6602-BPS-DC (OS6602-24 and OS6602-48) power supply
• Connector for OS6600-BPS-P PoE backup power supply (OS6600-P24 only)
• Power switch (OS6624, OS6648, OS6600-U24, OS6600-P24)
• Grounding block for type LCD8-10A-L grounding lug (all OmniSwitch 6600 Family switches)
OmniSwitch 6600 Family Rear Panel
!
R R
CAUTION: THIS UNIT MAY BE EQUIPPED WITH TWO POWER CONNECTIONS. TO REDUCE
THE RISK OF ELECTRICAL SHOCK, DISCONNECT
BOTH POWER CONNECTIONS BEFORE
SERVICING UNIT.
ATTENTION: CET APPAREIL COMPORTE PLUS D'UN CORDON D'ALIMENTATION. AFIN DE
PREVENIR LES CHOCS ELECTRIQUES, DEBRANCHE
LES DEUX CORDONS D'ALIMENTATION AVANTE DE
FAIRE LA REPARATION.
LAN PWR PORT
50/60 Hz, 2/2/1 A MODEL NO: OS-6648 100/115/230 V
RATING: 100-240V 50-60Hz, 1.02A
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION
IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS CLASS A DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE
CANADIAN INTERFERENCE-CAUSING EQUIPMENT REGULATIONS.
CET APPAREIL NUMÉRIQUE DE LA CLASSE A RESPECTE TOUTS LES EXIGENCES DU REGLEMENT SUR LE MATÉRIEL BROUILLEUR DU CANADA.
TUV Rheinland ProductSafety
geprufte Sicherheit Assembled in the US of US and Non-US Components
U.S. PATENT NO. 5,394,402
LISTED I.T.E. 5Z71
E164613C
PoE Power Connector
Reserved for use with the
PoE backup power supply
on the OS6600-P24. See
Chapter 3, “Installing and
Managing Power over
Ethernet (PoE).”
Redundant Power Supply Bay
Slot for optional user-installable OS6600-BPS (OS6624,
OS6648, OS6600-U24) or OS6602-BPS (OS6602-24 and
OS6602-48) backup power supply. For more information on
the backup power supply, including technical specifications
and installation instructions, refer to
“Backup Power Supply”
on page 2-26 .
Note: The OS6600-P24 does not have a backup power supply
bay. Instead, it has a connector for the OS6600-BPS-P PoE
backup power supply.
Power Switch
indicates on position;
indicates off position.
Power Connector Socket
Type IEC-320-C13. Supports
one 10 amp power cord.
It is recommended that you use
only Alcatel-provided power
cords.
Product, Safety, and Compliance Information
Refer to the “Regulatory Compliance and Safety
Information” chapter for detailed information.
Ground Lug Connection
Unpainted area for Type
LCD copper lug attach-
ment. Refer to
page 2-25
for more information.