Electro Cam 5000 Series - Manual (Page 23)

3-11 Wiring
User DC Power Input
10 - 30 VDC, 4 Amp Max
(Sinking outputs switch "-")
(Sourcing outputs switch "+")
Rack Address Jumper
1: Channels 1-32
2: Channels 33-64
3: Unused
4: Unused
(Jumper shown in position 1)
PL
µ
S Power LED
On when PL
µ
S control is powered up
and connected to rack
DB 25 Connectors (Female)
Connect to PLuS controller or another rack
(these connectors can be used interchangeably)
Output Terminals 9-16
E.C. Pt#: PS-9006-0012
(unpluggable)
User Power LED
On when user power applied to rack
(will NOT be on if user power fuse is blown)
User DC Power Fuses
4 Amps (F1= "+", F2="-")
E.C. Pt#: PS-9005-0004
Wickman Pt#: 19370-K
Dip Jumper Blocks on
Sinking Output Racks
E.C. Pt#: PS-9006-0015
Transistor Array Chips on
Sourcing Output Racks
(socketed for field replacement)
E.C. Pt#: PS-9011-2580
Generic Pt#: UDN-2580
OR
Transistor Array Chips
(socketed for field replacement)
E.C. Pt#: PS-9011-2803
Generic Pt#: ULN-2803
Output Terminals 1-8
E.C. Pt#: PS-9006-0011
(unpluggable)
Y
X
X X
X X
Y Y
Y Y
F1 F2
Each Output can Source 10-30 VDC, 100 mA Max Each Output can Sink 3-30 VDC, 100 mA Max
Output Terminals
17-24
E.C. Pt#: PS-9006-0013
(unpluggable)
Output Terminals
25-32
E.C. Pt#: PS-9006-0014
(unpluggable)
Sinking Output Rack Pt#: PS-4100-12-N32 Sourcing Output Rack Pt#: PS-4100-12-P32
PS-5X34 System: Output Rack Layout