ZOLL X Series Monitor Defibrillator Rev D - Manual (Page 22)

C HAPTER 1 M AINTENANCE T ESTS
16 9650-001356-01 Rev. D
4.0 Heart Rate Display Test
Equipment Fluke Impulse 7000DP Analyzer
ECG Cable (3-lead, 5-lead or 12-lead)
Test Setup Press Lead quick access key until II displays.
Connect the ECG leads to the ECG studs on Analyzer.
Do this... Observe this... Pass/Fail
4.1 Set the ECG Simulator to 120BPM. The Heart Rate displays as 120 +/- 4 bpm. o o