ZOLL X Series Monitor Defibrillator Rev D - Manual (Page 80)

C HAPTER 3 D ISASSEMBLY P ROCEDURES
74 9650-001356-01 Rev. D
5 Lift the casting up while
pushing down on the rubber
boot that runs around the
edge of the LCD screen.
6 Remove the copper tape from
the casting.
Note: During reassembly,
apply new copper tape for
grounding.
If casting is being replaced,
scuff the underside of the
casting where the tape is
being applied, with a
fiberglass brush.
Wipe area with lint free wipe
and alcohol.