Proface PS4800 - 19 Panel PC" - Manual (Page 112)

Hardware Modifications
112
6 The AC Power Supply Unit can now be moved parallel to the Industrial Personal
Computer in the direction indicated by the arrows in the figure below:
Plug the power supply plug into the socket on the Industrial Personal Computer. Be
sure that the housing is parallel and the plug on the AC Power Supply Unit is insert-
ed in the socket on the Industrial Personal Computer. There must not be any pres-
sure or mechanical strain on the connection.
7 Insert 4 Torx screws (T20) showed in the following figure:
8 The Industrial Personal Computer can now be mounted back in the control cabinet,
see Industrial Personal Computer Installation (see page 52).
Step Action