Proface PS4800 - 19 Panel PC" User Manual
Page 95
PS-4600 Series User Manual
95
Per port USB Dis-
able Control
Option to enable/disable individual USB
ports.
Enter
Opens the submenu.
Legacy USB support Option for setting legacy USB support. USB
ports do not function during startup. USB is
supported again after the operating system
has started. A USB keyboard is still recog-
nized during the POST.
Enabled
Enables this function.
Disabled
Disables this function.
Auto
Automatic enabling.
Per port Legacy USB
Support Control
Option to enable/disable legacy support for
individual USB ports.
Enter
Opens the submenu.
USB3.0 Support
Option for enabling or disabling USB 3.0
mode.
Enabled
All USB 3.0 ports run in USB
3.0 mode.
Disabled
All USB ports run in USB 2.0 or
1.1 mode.
XHCI Hand-off
Option for setting support for operating sys-
tems without a fully automated XHCI func-
tion.
Enabled
Enables USB 3.0 support.
Disabled
Disables this function. With op-
erating systems that do not
have a fully automated XHCI
function, USB devices are only
operated with USB 2.0.
EHCI Hand-off
Option for setting support for operating sys-
tems without a fully automated EHCI func-
tion.
Disabled
Disables this function. With op-
erating systems that do not
have a fully automated EHCI
function, USB devices are only
operated with USB 1.1.
Enabled
Enables USB 3.0 support.
Device Reset Time-
out
The waiting time that the USB device POST
requires after the device start command set.
10 seconds,
20 seconds,
30 seconds,
40 seconds
Value in seconds.
USB Transfer Time-
out
Option to set the timeout value for control,
bulk, and interrupt transfer.
1 second,
5 seconds,
10 seconds,
20 seconds
Value in seconds.
Device Power-up
Delay
Option to set the maximum time to wait for a
USB device to report to the host controller.
Auto
The maximum time is set auto-
matically. For a root port,
100 ms is set, for a hub port,
the data from the hub descrip-
tor is used.
Manual
You can enter the maximum
time manually using the option
device power-up delay in sec-
onds.
Device Power-up
Delay
Option to set the device power-up delay
manually.
1...40
Value in seconds. This setting
is only possible if Device pow-
er-up delay is set to Manual.
Overcurrent Protec-
tion
Option to set overcurrent protection for all
USB ports.
Disabled
Disables this function.
Enabled
Enables this function.
BIOS Setting
Description
Setting Op-
tions
Effect