Proface PS4800 - 19 Panel PC" - Manual (Page 160)

Hardware Modifications
160
CFast Card Installation and Removal
Overview
CFast cards are based on Single Level Cell (SLC) technology and are SATA 2.6
compatible.
Preparing to Use a CFast Card
The Industrial Personal Computer operating system views the CFast card as a hard
disk. Proper handling and care of the CFast card helps extend the life of the Card.
Familiarize yourself with the card prior to attempting insertion or removal of the card.
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
 Remove all power from the device before removing any covers or elements of
the system, and prior to installing or removing any accessories, hardware, or
cables.
 Unplug the power cable from both the Industrial Personal Computer and the
power supply.
 Always use a properly rated voltage sensing device to confirm power is off.
 Replace and secure all covers or elements of the system before applying power
to the unit.
 Use only the specified voltage when operating the Industrial Personal
Computer. The AC unit is designed to use 100...240 Vac input. The DC unit is
designed to use 24 Vdc. Always check whether your device is AC or DC
powered before applying power.
Failure to follow these instructions will result in death or serious injury.
CAUTION
CFAST CARD DAMAGE AND DATA LOSS
 Remove all power before making any contact with an installed CFast card.
 Use only CFast cards manufactured by Pro-face. The performance of the
Industrial Personal Computer has not been tested using CFast cards from other
manufacturers.
 Confirm that the CFast card is correctly oriented before insertion.
 Do not bend, drop, or strike the CFast card.
 Do not touch the CFast card connectors.
 Do not disassemble or modify the CFast card.
 Keep the CFast card dry.
Failure to follow these instructions can result in injury or equipment damage.