Proface PS4800 - 19 Panel PC" - Manual (Page 92)

Configuration of the BIOS
92
FER Fatal error reporting
Option for reporting fatal errors detected.
All of the functions in a multifunction device
is monitored. The report for the root port
takes place internally inside the root com-
plex. Enabled Enables this function.
Disabled Disables this function.
NFER Non-fatal error reporting
Option for reporting non-fatal errors detect-
ed. All of the functions in a multifunction de-
vice is monitored. The report for the root
port takes place internally inside the root
complex. Enabled Enables this function.
Disabled Disables this function.
CER Correctable error reporting
Option for reporting non-fatal errors detect-
ed. All of the functions in a multifunction de-
vice is monitored. The report for the root
port takes place internally inside the root
complex. Enabled Enables this function.
Disabled Disables this function.
CT0 PCI Express completion timer T0
This option is used to enable/disable PCI
Express Completion Timer.
NOTE: If the system detected an ROB
(Processor Reorder Buffer) Timeout,
then this setting should be set to
enabled.
Enabled Enables this function.
Disabled Disables this function.
SEFE System error on fatal error
Option for generating a system error de-
tected, if a fatal error detected is registered
by a device on the root port or on the root
port itself. Enabled Enables this function.
Disabled Disables this function.
SENFE System error on non-fatal error
Option for generating a system error de-
tected, if a nonfatal error detected is regis-
tered by a device on the root port or on the
root port itself. Enabled Enables this function.
Disabled Disables this function.
SECE System error on correctable error
Option for generating a system error de-
tected if a correctable error detected is reg-
istered by a device on the root port or on
the root port itself. Enabled Enables this function.
Disabled Disables this function.
PME SCI Option for generating an SCI if power man-
agement is detected. Enabled Enables this function.
Disabled Disables this function.
Always Enable
Port Option to keep port constantly enabled. Enabled Enables this function.
Disabled Disables this function.
PCIe speed Option for setting the PCI Express transfer
rate. Disabled Disables this function.
Auto Transfer rate is set automatically.
Gen1 The maximum transfer rate is
2.5 GT/s.
Gen2 The maximum transfer rate is 5 GT/s.
Assign INT to
Root Port Option for enabling/disabling the IRQ for
the root port. Enabled Enables this function.
Disabled Disables this function.
BIOS Setting Description Setting Op-
tions Effect