Proface PS4800 - 19 Panel PC" - Manual (Page 155)

PS-4600 Series User Manual
155
6 Slide the cover plate up to remove it:
7 Free the plastic removal strip fastened to the side of the Slide-in Disk drive:
(If no Slide-in Disk drive is present, proceed to step 9.)
8 Pull firmly on the removal strip to remove the Slide-in Disk drive:
9 When inserting a Slide-in Disk drive, be sure to align it with the guide rails. Tuck
the removal strip back between the drive and the frame (as it was before you
pulled it out).
10 The cover plate can now be replaced by following the steps in the reverse order.
11 The Industrial Personal Computer can now be mounted back in the control cab-
inet, see Industrial Personal Computer Installation (see page 52).
Step Action