Proface PS4800 - 19 Panel PC" - Manual (Page 184)

Maintenance
184
Reinstallation Procedure
Introduction
In certain cases, it may be necessary to reinstall the operating system.
Precautions to be taken:
 Keep static-producing materials (plastic, upholstery, carpeting) out of the
immediate work area.
 Do not remove ElectroStatic Discharge (ESD) sensitive components from their
anti-static bags until you are ready to install them.
 When handling static-sensitive components, wear a properly grounded wrist
strap (or equivalent).
 Avoid unnecessary contact with exposed conductors and component leads with
skin or clothing.
Before Reinstallation
Hardware required:
 Reinstallation DVD-ROM
 External DVD drive, compatible with DVD+R DL format, or a USB connection for
Industrial Personal Computer without DVD drive.
Setting up the hardware:
 Shut down Windows® in an orderly fashion and remove all power from the
device. Then, follow the applicable instructions described in Uninterruptible
Power Supply (UPS) (see page 115).
 Disconnect all external peripherals.
NOTE: Save all important data on the hard drive or CFast card (the reinstallation
process erases all data). The reinstallation process returns the computer to its
factory settings.
Reinstallation
Refer to the relevant procedure in “PS4000 Series Installation Guide” in a package.