Proface PS4800 - 19 Panel PC" User Manual
Page 51
PS-4600 Series User Manual
51
NOTE:
Ensure the thickness of the installation panel is from 1.6 to 9 mm
(0.06 to 0.35 in.).
(For Rear Mount Model, the thickness must be exactly 2.3 mm [0.09 in.].)
All installation panel surfaces should be strengthened. Give due consideration to
the weight of the Industrial Personal Computer, especially if high levels of
vibration are expected and the installation panel can move. Attach metal
reinforcing strips to the inside of the panel near the panel cut-out, to increase the
strength of the installation panel.
Ensure all installation tolerances are maintained.
The Industrial Personal Computer is designed for use on a flat surface of a
Type 4X enclosure (Indoor use only).
NOTE: The Slide-in Disk drive can only be exchanged without removing the
Industrial Personal Computer unit from the control cabinet if the wall is less than
5.5 mm (0.216 in.) thick.