Proface APL3000B - Node Box PC User Manual
Page 101
Advertising
PL3000 Series Hardware Manual
5-10
(2)
Disconnect the flexible cable.
(3)
Unscrew the four (4) attachment screws on the top and bottom faces of the front module.
(4)
Remove the control box from the front module.
Installing the control box on the front module
Install the control box on the front module in the reverse order of the removal steps of (1) to (4).
The necessary torque is 0.5N•m to 0.6N•m in every step.
Flexible Cable
Advertising