Proface APL3000B - Node Box PC - Manual (Page 57)

PL3000 Series Hardware Manual
3-16
3.4 Internal Switches Specifications
The internal switches are mounted on the bottom face of the control box and the rear face of the front module.
To operate these switches, remove the control box from the front module.
3.4.1 Internal switches of the control box
The following five switches are mounted on the inside of the control box.
SEE 5.2 Installing/removing the front module and the control box (page 5-9)
5.3.1 Removal/Attachment of the Switch Cover (page 5-13)
Switch
Location
Switch Name
Compatible
I/F
Factory
Settings
Description
SW1
System Set
Switch
-
See „ System Set
Switch (page 3-18).
10-point DIP switch. For System Set
Switch and the factory settings details,
see
„
System Set Switch (page 3-18).
SW2
Serial Mode
Select Switch
COM1 All OFF (RS-232C)
10-point DIP switch. Designates
COM1 communication settings. For
Serial Mode Select Switch details,
see
„ Serial Mode Select Switch
(page 3-19).
SW3
CI(RI)/+5 V
Changeover
Switch
COM2 CI(RI)
Not available on the built-in battery
unit version.
SW4
CI(RI)/+5 V
Changeover
Switch
COM1 CI(RI) Changes # 9 pin (CI(RI) /+5 V).
1 10 1 10
SW4 SW1 SW2 SW3
SW5
Enlarged view of the switches
Bottom
(CI)RI
5V
ON OF
F ON OF
F
Enlarged view of the
switches