Proface APL3000B - Node Box PC - Manual (Page 11)

10
Package Contents
„ Package contents of the PL-3000B Series (control box)
The following items are included in the PL unit’s package. Before using the PL, please check that all items listed here are
present.
This unit has been carefully packed, with special attention to quality. However, should you find anything damaged or
missing, please contact your local PL distributor immediately.
PL Unit: 1 • English and Japanese
Installation Guides
(one of each)
• Warning/Caution Information (1)
Installation Fasteners Set: 1
(Fasteners: 2, screws: 4)
USB Cable Clamp: (2ports) 2
USB Holder Set: 1
(Fasteners: 1, screws: 2)
Power Connector: 1
Power Switch Cover: 1 (AC type only)
(cover: 1, screws: 2)
*1
*1 The Power Switch Cover is packed in the PL unit approved ANSI/ISA standards, showing the appropriate revision
code on the PL unit. Please see " Installation prerequisites for standards (page 13)".
• When installing the PL, be careful not to damage the built-in HDD.
• If your PL unit contains a built-in accessory, that accessory’s Installation Guide will also
be included in the PL’s packing box. Please check that all items normally included with
that accessory are also included in this box.
AC type
(5.08mm [0.20in.] pitch)
DC type
(7.62mm [0.30in.] pitch)