Proface APL3000B - Node Box PC User Manual
Page 103
Advertising
PL3000 Series Hardware Manual
5-12
(4)
Slide the control box in direction shown by the arrow.
(5)
Lift the control box and remove the front module tabs from the slot on the installation fasteners for the
control box. Then remove the control box.
Installing the control box on the front module
Install the control box on the front module in the reverse order of the removal steps of (1) to (5).
The necessary torque is 0.5N•m to 0.6N•m in every step.
Slide
Use the bridge
position as a guide.
Advertising