Nematron Pointe Controller - Manual (Page 126)

Chapter 5: Developing Controller Programs Pointe Controller User Guide
124
4. Select the model number that corresponds to the I/O module that is
actually installed in the first slot in the Pointe Controller unit. In this
example, an OL2201 Digital Input module is selected.
5. Continue through the rest of the slots (1 through 8), selecting the model
numbers that correspond to the installed modules. If no module is
installed in a given slot, then skip it.
NOTE: To clear any selection, select the <blank> option at the top of the
drop-down menu.