Nematron Pointe Controller - Manual (Page 303)

Pointe Controller User Guide Appendix B: Flow Chart Command Reference
301
To configure the Chart parameter, click the button and select a chart
from the drop-down menu.
B.1.6 Get Tag Name
This command can be selected from the General commands list.
When used in a Flow Chart, the Get Tag Name command retrieves the name
(alias) of a specified tag and saves it to a string.
Parameters for this command include:
Source Tag – The tag from which the name is retrieved. Any Input,
Memory, or Output tag can be selected, as well as any String variable.
Timers cannot be selected.
To configure the Source Tag parameter, click the button to open a
standard Select Tag dialog.
Destination String – The String tag to which the name of Source Tag is
written. If the name is longer than the defined Element Length of the
String, then it will be truncated.
To configure the Destination String parameter, click the button to
open a standard Select String Tag dialog.
Name Type – Since all tags are referenced by Alias, this parameter cannot
be configured in PointeControl.