Nematron Pointe Controller - Manual (Page 333)

Pointe Controller User Guide Appendix B: Flow Chart Command Reference
331
B.6.2 Date/Time Format
This command can be selected from the Date/Time commands list.
When used in a Flow Chart, the Date/Time Format command formats a given time
as a string and writes the result to a String tag. The format of the string is <ddd
mmm DD HH:MM:SS.sss YYYY
>.
Parameters for this command include:
Date/Time Type – The time to be formatted, either the current system
time or some user-specified time. If the current system time is selected,
then it will be retrieved automatically when the block is executed. If a
user-specified time is selected, then the Seconds and Milliseconds
parameters below must also be configured.
To configure the Date/Time Type parameter, click the button and
select a type from the drop-down menu.
Seconds – The number of whole seconds elapsed since January 1, 1970.
The value of Seconds may be an Input/Memory/Output tag, a literal
numeric value, or some other logical expression that is evaluated every
time the block is executed.
To configure the Seconds parameter, click the button to open a
standard Build Argument dialog.
Milliseconds – The number of remaining milliseconds (total time elapsed
minus whole seconds).
The value of Milliseconds may be an Input/Memory/Output tag, a literal
numeric value, or some other logical expression that is evaluated every
time the block is executed.
To configure the Milliseconds parameter, click the button to open a
standard Build Argument dialog.
Destination String – The String tag to which the result of the command
will be written.