Nematron Pointe Controller - Manual (Page 67)

Pointe Controller User Guide Chapter 3: Quickstart Project
65
4. Double-click on any of the flow chart blocks (except the Start and Stop
blocks). A Block Watch window for that block will appear, showing all of
the tags referenced by that block.
The Block Watch window shows all of the tags used in the block and the
running value of each tag.
NOTE: The value shown for each tag is not the real-time value of the tag
as the Pointe Controller is actually executing the block. It is the value of
the tag at the time of last snapshot, which is generally more useful for
debugging purposes.
5. Close the Block Watch window.