Triton FT5000XP PC-BASED ATMS User Manual - Manual (Page 50)

3 0
M
ODEL
RL/FT5000 XP U
SER
M
ANUAL
8. If the paper is not automatically
taken-up by the printer, check the
tension roller lever on the printer
chassis. Pull the pin located on the
right side of the printer bracket
shown. Rotate the assembly
towards the front of the control
panel.
9. The blue tension lever is located
on the left side. It must be in the
closed position (blue lever facing
towards the right). If not, just move
the lever (moves in 3 positions) to
the correct position. Close the
cutter assembly and retry to feed
the printer paper. If successful,
continue with Step 10. If the paper
is not taken up automatically,
contact your service provider.
10. Close and lock the control panel.
Go to Management Functions >
Diagnostics > Printer and perform
a “Print Test Data”.
Release pin