Fire-Lite LDM-32F Lamp Drivers - Manual (Page 18)

2. Installation CHS-4L Chassis
18
LDM-32F PN 50055:C 03/20/01
Slip the bottom edge of the module or expander board into the slot on the chassis
and move the module toward the standoffs. Secure the board to the standoffs
with the screws provided. Repeat for installation of additional modules or
expanders.
Figure 5 Installing LDM Modules in CHS-4L
Connect an expander ribbon cable (P/N 75120) from the LDM-32F connector
J2 to J3 of the first LDM-E32F expander module. If multiple LDM-E32F
modules are to be used, connect additional cables from J2 to J3 as shown below.
One LDM-32F may support a maximum of three LDM-E32F modules.
Figure 6 LDMs Mounted in UL Listed Cabinet
Ld
mi
nchs.cd
r
Expander Ribbon Cables
LDM-32F LDM-E32F LDM-E32F LDM-E32F
Ld
mi
ncab
.cdr