Fire-Lite LDM-32F Lamp Drivers - Manual (Page 47)

Configuration Appendix B: MS-9200
LDM-32F PN 50055:C 03/20/01
47
Alarm /Trouble Annunciation of Points
The table below (also see Figure 30 on page 44) illustrates the configuration
of the LDM Series modules to annunciate the alarm and trouble states for all
99 points (detectors or modules) with the first eight points of address ‘01’
dedicated to the MS-9200 system functions (see Figure 31 on page 44).
Detectors
Set address ‘01’ and ‘02’ for detectors.
Table 19 Alarm/Trouble Setup - Detectors
Modules
Set address ‘03’ and ‘04” for modules
Table 20 Alarm/Trouble Setup - Modules
LDM Module
Address ‘01’
LDM Output Connectors
J5 J6 J7 J8
LDM-32F System Functions 1 to 4 5 to 8
1st LDM-E32F 9 to 12 13 to 16 17 to 20 21 to 24
2nd LDM-E32F 25 to 28 29 to 32 33 to 36 37 to 40
3rd LDM-E32F 41 to 44 45 to 48 49 to 52 53 to 56
LDM Module
Address ‘02’
LDM Output Connectors
J5 J6 J7 J8
LDM-32F 57 to 60 61 to 64 65 to 68 69 to 72
1st LDM-E32F 73 to 76 77 to 80 81 to 84 85 to 88
2nd LDM-E32F 89 to 92 93 to 96 97 to 99 Not Used
LDM Module
Address ‘03’
LDM Output Connectors
J5 J6 J7 J8
LDM-32F 1 to 4 5 to 8 9 to 12 13 to 16
1st LDM-E32F 17 to 20 21 to 24 25 to 28 29 to 32
2nd LDM-E32F 33 to 36 37 to 40 41 to 44 45 to 48
3rd LDM-E32F 49 to 52 53 to 56 57 to 60 61 to 64
LDM Module
Address ‘04’
LDM Output Connectors
J5 J6 J7 J8
LDM-32F 65 to 68 69 to 72 73 to 76 77 to 80
1st LDM-E32F 81 to 84 85 to 88 89 to 92 93 to 96
2nd LDM-E32F 97 to 99 Not Used Not Used Not Used