Fire-Lite LDM-32F Lamp Drivers - Manual (Page 46)

Appendix B: MS-9200 Configuration
46
LDM-32F PN 50055:C 03/20/01
Alarm Only Annunciation of Points -
With 8-Point shift
The tables below illustrate the configuration of the LDM Series modules to
annunciate the alarm state of all 99 points (detectors or modules) with the last
eight points of address ‘01’ dedicated to the MS-9200 system functions (see
Figure 29 on page 42).
Detectors
Set address ‘01’ and ‘02’ for detectors.
Table 17 Alarm Only Setup - Detectors (shift)
Modules
Set address ‘03’ and ‘04’ for modules.
Table 18 Alarm Only Setup - Modules (shift)
LDM Module
Address ‘01’
LDM Output Connectors
J5 J6 J7 J8
LDM-32F 1 to 8 9 to 16 17 to 24 25 to 32
LDM-E32F 33 to 40 41 to 48 49 to 56 Sys Funct
LDM Module
Address ‘02’
LDM Output Connectors
J5 J6 J7 J8
LDM-32F 57 to 64 65 to 72 73 to 80 81 to 88
LDM-E32F 89 to 96 97 to 99 Not Used Not Used
LDM Module
Address ‘03’
LDM Output Connectors
J5 J6 J7 J8
LDM-32F 1 to 8 9 to 16 17 to 24 25 to 32
LDM-E32F 33 to 40 41 to 48 49 to 56 57 to 64
LDM Module
Address ‘04’
LDM Output Connectors
J5 J6 J7 J8
LDM-32F 65 to 72 73 to 80 81 to 88 89 to 96
LDM-E32F 97 to 99 Not Used Not Used Not Used