KANOMAX 3900 Portable Particle Counter - Manual (Page 19)

3. Display Description and Operation Procedure 12
<Icons in the Status Display>
To switch to display chart.
/
Indicates if the instrument is powered by AC power cord or battery. If battery-powered, the
remaining battery level is also shown.
/
Indicates the pump status and pump error. When the pump is operating properly, the icon is in
blue. When the pump is off, the icon is in gray.
/
Indicates LD status and LD error. When the LD is operating properly, the icon is in blue. When
the LD is off, the icon is in gray.
Indicates if the measurement count per one second exceeds the maximum measurable
concentration.
Indicates if an instrument error is occurring. Tap this icon to display the error details.
Indicates the data storage status and error.
/
Switches between Total display and Single display.
is displayed when Total display is selected. is displayed when Single display is
selected.
The range of indicated data is as follows:
The numeric value will be indicated in black when Total display is set and in gray when Single
display is set.
Channel Total Display Single Display
0.3um X ≧ 0.3um 0.3um ≦ X ＜ 0.5um
0.5um X ≧ 0.5um 0.5um ≦ X ＜1.0um
1.0um X ≧ 1.0um 1.0um ≦ X ＜3.0um
3.0um X ≧ 3.0um 3.0um ≦ X ＜5.0um
5.0um X ≧ 5.0um 5.0um ≦ X ＜10.0um
10.0um X ≧ 10.0um X ≧ 10.0um
* X: detected particle count