KANOMAX 3900 Portable Particle Counter - Manual (Page 47)

3. Display Description and Operation Procedure 40
3.7 Configuration
In CONFIG setting screen you can configure measurement settings in each mode.
You can set items such as INTERVAL, SAMPLE T., CYCLES, MANUAL STOP, AUTO SAVE, AUTO
PRINT and START DELAY. Please note that the setting items vary depending on the measurement mode.
*User needs to have authorization to change configuration settings.
*User needs to have authorization to save user “PRESET” setting.
3.7.1 SINGLE
You can set SAMPLE T. (sampling time).
Tap the entry field to display a numeric keypad.
Enter “hour”, “minute” and “second” on the numeric
keypad and tap [OK].
Check “AUTO SAVE” to store data automatically.
Check “AUTO PRINT” to print data automatically.
Check “START DELAY” to use delay time prior to
a measurement.
Check “Set time” to set the time when you want to start a measurement.
Tap [OK] to save and activate the settings (Authentication required).
Tap [PRESET] on “MEASURE SETTING” dialog
box to display a window asking you to input PRESET
NAME.
Tap the entry field to display the keyboard. Enter the file name and tap [Enter].
Tap [OK] to save the current settings on the CF card (Authentication required).
* In the future you can automatically load the configuration saved here as a PRESET. Refer to 3.9 PRESET.
<numeric key pad to enter SAMPLE T.>
<keyboard to enter PRESET NAME>