KANOMAX 3900 Portable Particle Counter - Manual (Page 48)

3. Display Description and Operation Procedure 41
3.7.2 CONTINUOUS
Check “AUTO SAVE” to store data automatically.
Check “AUTO PRINT” to print data automatically.
Check “START DELAY” to use delay time prior to a
measurement.
Check “Set time” to set the time when you want to
start a measurement.
Tap [OK] to save and activate the current settings
(Authentication required).
Tap [PRESET] to display a window asking you to
input “PRESET NAME”.
Tap the entry field to display the keyboard. Enter the
file name and tap [Enter].
Tap [OK] to save the current settings on the CF card
(Authentication required).
* In the future you can load the configuration saved
here as a PRESET. Refer to 3.9 PRESET.