KANOMAX 3900 Portable Particle Counter - Manual (Page 36)

3. Display Description and Operation Procedure 29
When all measurements are finished, the
measurement result will be displayed.
You can view the result of a certain LOCATION
POINT by selecting Location.
Tap [EVAL] to display CLEAN ROOM
EVALUATION window.
Tap [REMEASURE] to perform a re-measurement.
Tap [PRINT] to print a measurement result.
Tap [PRINT] to print a measurement result.
By selecting particle size you can change the particle
size of the data to be evaluated. However, the
RESULT will be made based on the particle size
selected in CONFIG setting.
Tap [CLOSE] to close window.
After a whole set of measurement is complete,
button will be displayed.
If you want to view the measurement result again,
tap button to redisplay the measurement result.
<Measurement RESULT>
<CLEAN ROOM EVALUATION>