KANOMAX 3900 Portable Particle Counter - Manual (Page 35)

3. Display Description and Operation Procedure 28
After a measurement at each location is finished, a
measurement result will be displayed.
In [RAW DATA] tab, measurement data will be
displayed.
In [CALC DATA] tab, calculated data of minimum
(MIN), maximum (MAX) and average (AVE) will be
displayed.
Tap [NEXT] to display a “CONFIRM” window
informing you of the next measurement point, and
wait for the next measurement.
Tap [REMEASURE] to perform a re-measurement.
Tap [STOP] to stop a measurement.
Tap [PRINT] to print a measurement result.
Tap [START] to start a measurement.
Tap [STOP] to stop a measurement.
Tap button while measuring to display a chart.
Tap [STOP] to stop a measurement.
<CONFIRM window>