KANOMAX 3900 Portable Particle Counter - Manual (Page 50)

3. Display Description and Operation Procedure 43
3.7.4 REPEAT
You can set SAMPLE T., CYCLES and MANUAL
STOP.
Tap the entry field of SAMPLE T. to display a numeric
keypad. Enter “hour”, “minute” and “second” and tap
[OK].
Tap the entry field of “CYCLES” to display a numeric
keypad. Enter a value and tap [Enter].
Check “MANUAL STOP” to continue measuring until
you stop the measurement, regardless of the CYCLES
setting.
Check “AUTO SAVE” to store data automatically.
Check “AUTO PRINT” to print data automatically.
Check “START DELAY” to use delay time prior to a
measurement.
Check “Set time” to set the time when you want to start
a measurement.
Tap [OK] to save and activate the settings
(Authentication required).
Tap [PRESET] to display a window asking you to input
“PRESET NAME”.
Tap the entry field to display the keyboard. Enter the
file name and tap [Enter].
Tap [OK] to save the current settings on the CF card
(Authentication required).
* You can automatically configure measurement settings
by loading a saved PRESET. Refer to 3.9 PRESET.
<Input PRESET NAME>