KANOMAX 3900 Portable Particle Counter - Manual (Page 46)

3. Display Description and Operation Procedure 39
[STANDARD]
If you start a measurement when the instrument is in a temporary state of suspension, the message below will be
displayed.
Tap [YES] to resume measuring from the next LOCATION.
Tap [NO] to display CLEAN ROOM EVALUATION. Then the
measurement will be completed.
Tap [PRINT] to print out the result.
Tap [CANCEL] to close the CLEAN ROOM
EVALUATION window.
If you try to switch mode, the below message will be displayed.
Tap [OK].
You cannot change the mode when a measurement is in a
temporary state of suspension.
Tap [START] to determine the next stop.