KYORITSU 5000 Instruction Manual - Manual (Page 10)

― 8 ―
3-4）Displayed message
M e s s a g e M e a n i n g
Sensor is not connected.
Over-range
Menu: Setting1(SET.1)
View or change the recording mode/ condition.
Menu: Setting2(SET.2)
View or change the Location information and
auto-power-off function.
Menu: Status 1(STS.1)
View the recorded quantity and the max. value
at each channel.
Menu: Status 2(STS.2)
View the number of recorded data and
RECALL.
Menu: End
Continuous recording mode (LOGging)
Event recording mode (detect)
Max. value recording mode (Max)
Capture recording mode (CAPture)
PC data in transit
Warning of memory clear