KYORITSU 5000 Instruction Manual - Manual (Page 26)

― 24 ―
፧
፧
፧
፧
፧
4. Pre-set current value on channel 1 is
displayed.
Can be set at every 1mA from 0 to 1000mA.
¡ Press the button and proceed to the
next step when not changing the setting.
¡ To change the setting, press the
button.
Then the indication on the LCD flashes. Press
the
or button to set the value the
desired one). Then press the button to
confirm it.
Note After 1 data is recorded, current will not be
detected until current drops to 50% or less of
the preset current value. Please set it to the
appropriate value with reference to the
measurement performed before starting a
recording.
5. State of One-time system is displayed.
on: Recording stops when memory becomes full
off: Overwrite the old data, and store the latest
data.
¡ Press the button and proceed to the
next step when not changing the setting.
¡ To change the setting, press the
button.
Then the indication on the LCD flashes. Press
the
or button to set the value to
the desired one. Then press the button
to confirm it.
6. Now Setting 1 is complete; "End" is displayed
on the LCD. Press the button to return
to the screen on which "SEt.1" is displayed.
7. Press the button to get the instrument
ready for a measurement.