KYORITSU 5000 Instruction Manual - Manual (Page 15)

― 13 ―
፧
፧
፧
4. Press the button to switch the
measurement ranges at each channel.
The Range hold function is activated
when the
mark is displayed on the
LCD.
Note
¡ At continuous recording mode:
It switches in the sequence below.
Auto-ranging→1000mA→100.0mA→
Auto-ranging
¡ At Event/ Max. value/ Capture recording
mode:
It switches between 1000mA and
100.0mA.
Range cannot be switched during a
recording. Select the appropriate range
before a recording.
5. When only the leftmost segment of the
Battery mark is flashing on the LCD, it
means battery voltage is low.
Replace the batteries with new ones.
When nothing is displayed on the LCD,
the batteries are exhausted. Replace
the batteries with new ones.