KYORITSU 5000 Instruction Manual - Manual (Page 11)

― 9 ―
４．Recording procedures
Following explains the flow of operation: through preparation to the stop
of recording.
P. 10
Select the appropriate sensor, and connect it to the
instrument.
P. 11
Confirm the recording mode.
P. 12
Install the instrument and do setups for each
channel.
P. 14
Start recording.
P. 15
Stop recording.
* The recorded data can be viewed either by the following two methods.
(1) On a PC: Refer to "8. Data transfer to PC" in this manual. (P.35)
(2) On the instrument: Refer to (2)Confirmation of recorded data (status 1)
and (3)Confirmation of recorded data (status 2) described in the
supplied Quick manual.
* Press the button at least 1 sec. to power off the instrument.
Step1: Preparation
Step2: Confirmation and change of set value
Step3: Preparation before a recording
Step4: Start of recording
Step5: Stop of recording
▼
▼
▼
▼