KYORITSU 5000 Instruction Manual - Manual (Page 5)

― 3 ―
2. Features
¡ This instrument is a leak logger for measuring and recording
leakage current.
¡ Capable of recording leakage current from 1 to 3ch with leakage
clamp sensor. (Leak clamp sensors: M-8141/8142/8143 are
available.)
¡ Can measure and record max. AC1000mA(50/60Hz) with RMS.
¡ LED current indicator flashes when the preset current value is
exceeded. (Event/ Max. value/ Capture recording mode)
¡ Can store 60,000 data when using 1ch, and when using all 3ch,
can store 20,000 data at each channel. (Continuous recording
mode)
¡ Data will not be lost at battery replacement or at lower battery
voltage as it is stored in nonvolatile memory.
¡ Can perform recording for long time with Power-save function.
¡ Can transfer the recorded data to PC via USB cable.
¡ Protected throughout by double (reinforced) insulation "F".
¡ This instrument provides 4 recording modes. Can be used for
any kinds of insulation controls since the user can select any
desirable recording mode as usage. Read through the
instruction manual and understand the features of each
recording mode to select the appropriate recording mode.