Spectrex 40/40L-LB UV/IR Flame Detector Series - Manual (Page 14)

SharpEye TM UV/IR Flame Detector User Guide
2 Model and Types
The SharpEye 40/40 detectors are designed to operate as a stand-alone unit
directly connected to an alarm system or an automatic fire extinguishing
system. The detector can also be a part of a more complex system, where
many detectors and other devices are integrated through a common control
unit.
1.2 Model and Types
The 40/40L, LB, L4, L4B UV/IR flame detectors are provided in various
configurations depending on:
 UV/IR Model
 Wiring options
 Temperature ranges
 Type of cable entries
 Housing type
 Required approval
The configuration detail is included in the product part number on the
product label and takes the form: 40/40L, LB, L4, L4B XXXXX, where XXXXX
defines the model according to the above requirements.
To modify the default or pre-ordered configuration and perform
maintenance tasks, please refer to the HART Protocol TM777030, the
Manual TM 777050 or TM777060.
The Part Numbers are defined as:
Note: *Aluminum housing is available in ATEX/IECEx version only.
Table 1 describes the wiring options in detail.
*