Spectrex 40/40L-LB UV/IR Flame Detector Series - Manual (Page 5)

About this Guide v
About this Guide
This guide describes the SharpEye Model 40/40L, LB, L4, L4B (UV/IR) Flame
Detector and its features and provides instructions on how to install, operate
and maintain the detector.
This guide includes the following chapters and appendixes:
 Chapter 1, Introduction, provides a general overview of the product,
principles of operation, and performance considerations.
 Chapter 2, Installing the Detector, describes how to install the
detector including preparations before installation, wiring and mode
settings.
 Chapter 3, Operating the Detector, describes how to power-up and
test the detector. The chapter also lists safety precautions you should
take when operating the detector.
 Chapter 4, Maintenance and troubleshooting, describes basic
maintenance procedures, and troubleshooting and support procedures.
 Appendix A, Technical Specifications: Lists the detectors technical
and other specifications.
 Appendix B, Wiring Instructions, lists the wiring instructions for
connecting the detector and also provides examples of typical wiring
configurations.
 Appendix C, RS-485 Communication Network, provides an overview
of the RS-485 communications network.
 Appendix D, Accessories, describes the accessories available for the
detector.
 Appendix E, SIL-2 Features, describes the special conditions to
comply with the requirements of EN 61508 for SIL 2 according to TUV.